 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Filename: TFS117.doc Version 2.0 21.03.2003 VI TELEFILTER Measurement condition Ambient temperature: Input power level: Terminating impedance: * Input: Output: 23 0 288 258 C dBm Filter specification TFS 117 1/5 || -22.2 pF || -22.6 pF Characteristics Remark: The reference level for the relative attenuation arel of TFS117 is the minimum of the pass band attenuation amin. This value is defined as the insertion loss ae. The centre frequency fc is the arithmetic mean value of the upper and lower frequencies at the 3 dB filter attenuation level relative to the insertion loss a e. The given values for the relative attenuation arel and the group delay ripple have to be reached at the frequencies given below, even if the centre frequency f c is shifted due to the temperature coefficient of frequency TCf in the operating temperature range and due to a production tolerance for the centre frequency fc. Data Insertion loss (reference level) Nominal frequency Centre frequency Pass band ripple Relative attenuation fN fN fN fN fN fN + 90 1,8 6 30 30 ae typ. value 5,0 dB tolerance / limit max. 8 dB fN 117,4 0,5 MHz dB max. 117,4 MHz 1 dB within fN 90 kHz a rel ... fN 90 kHz ... fN 200 MHz ... MHz ... MHz ... MHz ... fN 6 fN 30 fN + 200 fN - 115 kHz kHz MHz MHz MHz MHz 0,5 0,5 30 42 52 52 800 100 (TCf) *) - 18 - dB dB dB dB dB dB ns ns ppm/K max. max. min. min. min. min. max. max. 1 3 20 35 20 20 1 1 - dB dB dB dB dB dB s s Group delay at fN Group delay ripple fN 90 kHz Temperature coefficient of frequency Operating temperature range Storage temperature range - 10 C ... + 85 C - 40 C ... + 85 C Input power level : max. 10 dBm *) The terminating impedances depend on parasitics and q-values of matching elements and the board used, and are to be understood as reference values only. Should there be additional questions do not hesitate to ask for an application note or contact our design team. **) fc(Hz) = Tcf(ppm/K) x (T - To) x fCAT (MHz) generated: checked / approved: TELEFILTER GmbH Potsdamer Strae 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@telefilter.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: TFS117.doc Version 2.0 21.03.2003 VI TELEFILTER Construction and pin connection (All dimensions in mm) Filter specification TFS 117 2/5 TFS 117 R12 date code 1 2 3 4 5 6 7 8 9 10 Output Ground Ground Ground Ground Input Ground Ground Ground Ground date code N P R ... year + month 2001 2002 2003 1 10 9 8 2 3 4 5 7 6 50 matching network: L1 6 Input 50 Ohm C1 1 L2 Output 50 Ohm C2 SAW 2,3,4,5,7 8,9,10 TELEFILTER GmbH Potsdamer Strae 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@telefilter.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: TFS117.doc Version 2.0 21.03.2003 VI TELEFILTER Stability characteristics Filter specification TFS 117 3/5 After the following tests the filter shall meet the whole specification: 1. Shock: 2. Vibration: plan, 3 plans; 3. Change of temperature: 4. Resistance to solder heat (reflow): 500g, 18 ms, half sine wave, 3 shocks each plane; DIN IEC 68 T2 - 27 10 Hz to 500 Hz, 0,35 mm or Packing Tape & Reel: IEC 286 3, with exeption of value for N and minimum bending radius; tape type II, embossed carrier tape with top cover tape on the upper side; max. pieces of filters peer reel: reel of empty components at start: reel of empty components at start including leader: trailer: 2000 min. 300 mm min. 500 mm min. 300 mm EMBOSSED CARRIER TAPE Tape (all dimensions in mm) W : 16,00 0,3 Po : 4,00 0,1 Do : 1,50 +0,1/-0 E : 1,75 0,1 F : 7,50 0,1 G(min) : 0,60 P2 : 2,00 0,1 P1 : 12,00 0,1 D1(min) : 1,50 Ao : 7,60 0,1 Bo : 9,60 0,1 Ct : 13,5 0,1 Do Po P2 E Ao F W D1 13,4 0,1 Bo G P1 COVER TAPE Reel (all dimensions in mm) A : 330 W1 : 16,4 +2/-0 W2(max) : 22,4 N(min) : 60 C : 12,8 0,1 A C N W2 W1 The minimum bending radius is 45 mm. The mounting surface of the filters faces the bottom side of the embossed carrier tape. Marking of the filters can be read if the upper side of the carrier tape is regarded with the sprocket holes on the right. TELEFILTER GmbH Potsdamer Strae 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@telefilter.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: TFS117.doc Version 2.0 21.03.2003 VI TELEFILTER Air reflow temperature conditions Filter specification TFS 117 4/5 1st and 2nd air reflow profile Name: Temperature: Time: pre-heating periods 150 C - 170 C 60 sec. - 90 sec. main-heating periods over 200 C 20 sec. - 25 sec. peak temperature 255 C 5 C Chip-mount air reflow profile 260 240 220 200 180 temperature / C 160 140 120 100 80 60 40 20 0 0 20 40 60 80 100 120 time / sec. 140 160 180 200 220 240 Table for temperature vs. time during the air reflow process Tolerance of temperatures: 5 C time / sec. 0 10 20 30 40 50 60 70 80 90 100 110 120 130 temperature / C 23 34 46 60 80 103 121 134 143 150 154 156 158 159 time / sec. 140 150 160 170 180 190 195 200 205 210 215 220 230 240 temperature / C 160 161 164 170 180 205 230 255 230 205 180 165 140 120 TELEFILTER GmbH Potsdamer Strae 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@telefilter.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: TFS117.doc Version 2.0 21.03.2003 VI TELEFILTER Filter specification TFS 117 5/5 History Version Reason of Changes Name Date Filter specification 2.0 - terminating impedances amd typical values added Steiner 21.03.2003 TELEFILTER GmbH Potsdamer Strae 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@telefilter.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. |
Price & Availability of TFS117
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |